Acid Digestion Vessel
These Acid Digestion Vessels are designed specifically for preparing laboratory samples for chemical analysis. JN Sciencetech offers both general-purpose and microwave acid digestion vessels for dissolving or digesting inorganic or organic samples in strong acids or alkalis in pressure vessels at elevated temperatures and pressures, with complete containment and recovery.
Acid digestion vessels offer an alternative to the task of preparing analytical samples for analysis. By combining the unique chemical inertness of PTFE with the advantages of a sealed pressure vessel, these convenient vessels offer a rapid procedure for sample dissolution or digestion that has several important advantages over more traditional methods of sample preparation. By providing a convenient means for holding strong mineral acids or alkalis at temperatures well above normal boiling points, these sturdy digestion vessels.
ACID DIGESTION VESSEL
| Part. No. | Capacity | Body Dia | Body Height | Closure Type | Cups Inner Dia | Cup Inner Height | Body Moc | Liner | Max PSI | Max Temp. |
|---|---|---|---|---|---|---|---|---|---|---|
| 75645 | 10 ml | 65 mm | 83 mm | Spanner Wrench | 26 mm | 23 mm | SS 316 | Teflon | 1800 | 240°C |
| 75646 | 25 ml | 65 mm | 83 mm | Spanner Wrench | 26 mm | 44 mm | SS 316 | Teflon | 1800 | 240°C |
| 75647 | 25 ml | 60 mm | 86 mm | Six Screws Cap | 31 mm | 30 mm | SS 316 | Teflon | 1200 | 240°C |
| 75648 | 25 ml | 84 mm | 126 mm | Six Screws Cap | 31 mm | 32 mm | SS 316 | Teflon | 5000 | 240°C |
| 75649 | 25 ml | 80 mm | 112 mm | Six Screws Cap | 31 mm | 32 mm | SS 316 | PPL | 1200 | 280°C |
| 75650 | 50 ml | 64 mm | 134 mm | Spanner Wrench | 26 mm | 95 mm | SS 316 | Teflon | 1800 | 240°C |
| 75651 | 50 ml | 80 mm | 143 mm | Six Screws Cap | 31 mm | 62 mm | SS 316 | PPL | 1200 | 280°C |
| 75652 | 125 ml | 95 mm | 160 mm | Six Screws Cap | 46 mm | 83 mm | SS 316 | Teflon | 1900 | 240°C |
| 75653 | 200 ml | 95 mm | 210 mm | Six Screws Cap | 46 mm | 135 mm | SS 316 | Teflon | 1900 | 240°C |
Heating Blocks Optional | Available with PPL liner on Special Request | PPL ( polyphenylene polymer) Liner Max Working Temp 280°C
For Over Pressure : A safety blow-off disc above the PTFE cup will release pressure
We produce both standard and customized autoclaves with variations in width, depth, height and volume.
