I GLASS FUELCELL BOTTLES

 

We present our line of Microbial Fuel Cell Glass Bottles. These cell bottles configurations are  the distillation of many dozens of designs that have been produced for research  and we believe our cells cover a lot of the basic needs for this area of investigation. They are inexpensive, straight-forward, flexible, as well as modifiable. You can see many.

Microbial fuel cells are essentially modified H-cells, to be used with various membranes sandwiched between the flanges. Our cells utilize NW glass flanges tooled to mimic the stainless steel KF series of flanges, and have corresponding seals and wraparound knuckle clamps. These flanges are called-out by their I.D. and the most common sizes are 25mm, 40mm, and 50 mm. The ports are glass threads that use sealing rings to hold electrodes, hose barbs for liquid flow, or Teflon-faced septa for needle sampling.

 

These cells are constructed on standard borosilicate media bottles, and fitted with robust GL14 threaded glass side ports. Typically, we stock these as blanks in 100ml and 250ml volumes with three different options for porting: hose barbs, Teflon faced silicone septa for piercing for sampling, and sealing rings to hold electodes.

The standard side ports are GL14 threads, and the large bottle opening is a GL45 thread, all of which can be sealed with either closed caps, or open caps with Teflon-faced silicone septa. We also have sealing rings to hold and seal electrodes or tubulation (up to 1/4″ diameter in the GL14’s), among other options. Check out a page of these options.

GLASS FUEL CELL BOTTLES
Part No Per Side Flange
10354 100 ml 25 mm
10355 250 ml 40 mm
10356 500 ml 50 mm
10357 1000 ml 60 mm

Standard Centre Neck is GL-45 and Side Ports are GL 14 | Flange Clamps are Made of Teflon (PTFE).